5 Pounds Stainless Steel Tumbling Media Pins 5lb .047" x .255" Made in USA

Description

5 Pounds (2.267 kg) Stainless Steel Tumbling Media Pins – 0.047″ x 0.255″
Don’t be fooled by INFERIOR 0.041″ or 0.042″ media sold by other sellers. The obsolete 41/42 diameter media WILL GET JAMMED in your cases. Reputable sellers don’t carry it.
INTERNATIONAL customers welcome!
We ship our stainless media to many countries using the Global Shipping Program.
Stainless Steel Tumbling Pins
by
guntap
is the best tumbling media to clean, deburr, and burnish metals. Ideal for handloaders who use a rotary or magnetic tumbler and want their brass cartridges to be sparkling clean inside and out. The media can be used with brass cases with any primer pocket or flash hole size without fear of having stuck pins.
Please take note that all purchases $150 or more will be shipped with
USPS Signature Confirmation
. If this will be an issue, contact us prior to purchasing.
BONUS (
only for U.S. shipments
):
With every purchase, receive a
free sample
of our proprietary in-house formulation of
Brass Shine Powder Detergent
! Forget using dish detergent and a water softener.
Brass Shine
is all you need to get your brass bright and shiny!
The more pins you purchase, the more free samples you receive
:
Pounds Purchased
Free
Brass Shine
30g Sample Packets
1 to 10
1 Free (30g, 2 tbsp)
11 to 20
2 Free (60g, 4 tbsp)
21 to 30
3 Free (90g, 6 tbsp)
31 to 40
4 Free (120g, 8 tbsp)
41 to 50
5 Free (150g, 10 tbsp)
51+
6 Free + 1 per 10 lb thereafter
INTERNATIONAL Customers: Sorry, but we cannot export our detergent at this time.
Brass Shine
Directions:
For a 1 quart drum tumbler, use 1 teaspoon (2 teaspoons for very dirty brass). For a 1 gallon drum tumbler, use 1 tablespoon (2 tablespoons, or entire packet, for very dirty brass).
To purchase
Brass Shine Powder Detergent
, we sell it in 1 pound and 2 pound packages. If you can’t find it online, let us know and we’ll point you to it.
Detailed Product Information and FAQ
Created from extremely tough 302/304 stainless steel, these pins will last for thousands of cleanings. The pin dimension was specifically designed such that the pins will not get jammed sideways or side-by-side in the primer pocket or flash hole.
However, it is possible for pins to get jammed sideways in certain brass cartridges. Because there are hundreds of different brass cartridge specifications, it’s not possible to design a pin that works with every cartridge. Best practice is to always inspect your cartridges prior to loading.
Q:
How do I use these stainless tumbling pins?
A:
Place the stainless steel tumbling media in a rotary or magnetic tumbler, along with water, detergent (we recommend
Brass Shine
), and brass cartridges or other metal parts. The amount of water needed varies, but start with 1/2 drum full and adjust for future cleanings.
Run until clean, typically between 30 minutes and 2 hours. When first starting out,
check every 15 minutes to see if additional cleaning is necessary
. Use with
Brass Shine
Powder Detergent for best results. Do not exceed the tumbler’s maximum weight capacity otherwise premature motor failure may occur.
Q:
Is there any difference with the 0.041″/0.042″ diameter pins and your 0.047″ pins?
A:
Yes, and it’s an important difference
. The diameter of our pins is specifically designed so that they do not get stuck in your primer pocket or flash hole. Pins of a different diameter — such as the inferior 0.041″/0.042″ pins — can get jammed in your primer pockets and/or flash holes, which will end up in a lot of wasted time on your part removing the stuck pins from the cases. Don’t make the mistake of purchasing inferior stainless tumbling media.
Q:
Will these pins work in a vibratory tumbler or ultrasonic cleaner?
A:
These pins are designed for rotary and magnetic tumblers. They are not recommended for vibratory tumblers, but some customers have successfully used them in such tumblers. These pins will not work in ultrasonic cleaners.
Q:
How much tumbling media do I need for my tumbler?
A:
For a 15 pound/1 gallon drum (e.g. Thumler’s Model B), 5 pounds of pins are needed to clean your items quickly and efficiently. For a 3 pound/1 quart drum (e.g. Harbor Freight Item 67631), 1 pound is sufficient.
More pins may slightly speed up the process, but using too many pins can potentially cause poor cleaning performance or prematurely burn out your motor. If you have a custom tumbler, send us a message or call us at
our 1-800 number
for advice on how many pins are correct for your application.
Q:
This is too much/not enough media for my tumbler. Do you sell in other sizes?
A:
This listing is for
5 pounds of stainless pins
.
Click here for the many different sizes we sell.
If there’s an amount you need that we don’t have listed, let us know and we’ll custom package it just for you!
Q:
Will I need to buy more pins in the future?
A:
Stainless steel pins
will not
rust, fracture, or breakdown during the tumbling process. They are very small, with a length of 0.255″ (tolerance ± 5%) and diameter of 0.047″. The only reason you buy more pins is to replenish the ones you lose (which is inevitable).
Q:
Are these pins magnetic? I thought only 400-series alloys were magnetic.
A:
These 302/304 stainless steel pins are magnetic
. The process by which it happens is called Martensitic Stress Induced Transformation (MSIT). This allows you to easily separate and pick up the pins with a strong magnet. We recommend using a rare-earth neodymium or large coated ceramic magnet to capture all the pins that fall out of the tumbler.
Q:
How far should I process my brass before cleaning?
A:
It’s best to only deprime your brass (and chamfer military brass) prior to cleaning. You can size your brass prior to cleaning, but you will want to resize after cleaning to ensure any small deformations that may occur during cleaning are eliminated.
Q:
What else can these pins be used for?
A:
Although this specific pin dimension was designed for cleaning brass cartridges, it can be used in many different industrial and jewelry applications, such as deburring, burnishing, and cleaning parts. Be sure the hardness of 302/304 stainless will work for your application and not damage your items, especially when using soft/precious metals.
Q:
Can you make pins in a custom size and/or custom metal?
A:
It depends on the dimensions and metal. If we can, there is typically a minimum order of 50 pounds and a price quote will be provided. Lead times for custom orders are typically 4 to 6 weeks. Send us a message or call us at
our 1-800 number
for more information.
Q:
Where are these pins made?
A:
Made in the USA by an ISO 9001:2008 certified facility.
Q:
Are you an eBay only business?
A:
No, eBay is just one of our retail channels.
Although we are a highly-rated eBay seller
, you can purchase directly from us if you choose. You may also see our products sold at various retail outlets. Regardless of where you purchase our product, we want to ensure you get the best possible price while being 100% satisfied with your purchase.
Product Specifications
Diameter
0.047″ (1.19mm)
Length
0.255″ (6.48mm) [tolerance ± 5%]
Alloy
302/304
Rockwell Hardness
C 45 — 58
Vickers Hardness
446 — 653
Quantity
5 pound pouch
Certification
ISO 9001:2008
Origin
Made in the USA
Payment
At guntap, we use PayPal for all eBay related purchases.
Shipping
Service
First Item
Each Additional
USPS Priority
(Purchases > $150 Signature Confirmation)
FREE
FREE
USPS Priority Express
(Purchases > $150 Signature Confirmation)
$29.00
$4.00
Returns
Returns are accepted within 14 days.
Item must be returned sealed and in unused condition. Buyer pays return shipping and can choose money back or a replacement.
Feedback & Questions
Please leave feedback AND a 5-STAR review if you are satisfied with your purchase. It is very important to us and helps us grow our product selection. We will be sure to do the same. Please
do not
leave negative feedback without first contacting us to resolve any issue you may have with the product. We want to ensure your 100% satisfaction.
If you have any questions regarding this item, a special request, or about a purchase you’ve made, please contact us using eBay’s messaging system. A website for guntap and e-mail address exist, however, we cannot give that out due to eBay policy.